|
|
Control of HVAC equipments
Zaoralová, Kateřina ; Weiglhofer,, Willy (referee) ; Rubina, Aleš (advisor)
The aim of the diploma thesis is application of the topic Control of HVAC equipments. The thesis is divided into three part – A, B, C. The first theoretical part deals with controlling/regulation in general, it focuses on controlling/regulation of HVAC equipments and it describes ways of air volume flow measurement, which relates to the third experimental part. The second part is focused on design of HVAC system in inpatient ward and fit-out for employees. In the third part was realized verification of air flow volume controller in two chosen buildings, whence in one there weren´t fulfilled manufacturer´s requirements and in the second one they were fulfilled. In conclusion there were compared measured values.
|
|
|
Air conditioning in the hospital
Soltýš, Matej ; Rubinová, Olga (referee) ; Blasinski, Petr (advisor)
Subject of this bachelor thesis is design of an air handling unit intended for air condition of a cleanroom hospital area. The work is divided into three parts – theoretical, computational and project one. Theoretical part summarizes the basic issues of a clean rooms in healthcare and requirements for indoor microclimate. Subject of the computational part is design of the three air handling units serving the operating rooms and their facilities. Air handling units provide required air exchanges, cover heat gains and heat losses and, in the case of the operating room units, also regulate humidity. Emphasis is placed on the air filtration so that it meets the conditions for a clean rooms of a given nature. The last project part contains pro-ject documentation of the proposed units at the construction project level.
|
|
|
Air-conditioning of Department store
Chorý, Vojtěch ; Rubina,, Aleš (referee) ; Rubinová, Olga (advisor)
The topic of this bachelor thesis is design of air-condition equipment for veterinary clinic. The clinic is located on the first floor of a multifunctional building in Brno city. For design purposes is used warm-air heating, air-conditioning and forced air-replacement. The theoretical part is focused on clean room issue. The Project part contains a project documentation for realization of two air-conditioning equipment. The first air-conditioning equipment is designed for warm-air heating and air-conditionig of clean rooms. The second air-conditioning equipment provides forcer air-replacement of the clinic.
|
|
|
Indoor environment of pool halls
Halla, Ondřej ; Rubina, Aleš (referee) ; Rubinová, Olga (advisor)
The diploma thesis deals with the problems of the indoor environment of swimming pool halls. Firstly, it describes issues and principles of designing HVAC system in the areas with high humidity production. Thesis then focuses on various approaches to calculations of evaporation from the water surface and different possibilities of dehumidification including different types of HVAC units. This knowledge was applied to the design of HVAC system for particular assigned building, for which are proposed two different solutions. Thesis includes experimental part, its aim is to analyse one specific critical part of the hall. Based on local surveying and long-term measurements a few possibilities of improvement are suggested.
|
|
|
Pension ventilation
Šplíchalová, Kateřina ; Blasinski, Petr (referee) ; Rubinová, Olga (advisor)
This bachelor's thesis deals with the explanation of the problems of air conditioning and the design of air conditioning units in a civil engineering building, more precisely in the pension. the work is divided into three parts. The first part deals with theory. It focuses on the principles, systems and types of air conditioning equipment. The second part is focused on the design of air conditioning units in the pension, there are three separate devices with a common drain to the exterior from the air conditioning engine room. The third part deals with project documentation.
|
|
|
Detached house with graphic studio
Ptáčková, Eva ; Krejsa, Jan (referee) ; Kacálek, Petr (advisor)
The aim of this Bachelor‘s thesis is an elaboration of project documentation of construction part for a project of new detached house with workshop in Hodonín. Object is composed of two floors and partial basement. In the first floor there are a graphic studio and a common part of living area. In the second there are a private zone and a roof terrace. In the basement there are technical facilities and an atelier for a studio. Construction system is a longitudinal wall system. The ceilings are made of prefabricated rib-and-filler floor. The roof of object is single-layer flat roof.
|
|
|
Air-conditioning of offices in an industrial building
Drexler, Tomáš ; Pavelek, Milan (referee) ; Janotková, Eva (advisor)
Aim diploma thesis is design and dimensioning central air - conditioning system of offices in industrial object. To air - conditioning was choose 2nd floor office building. Introduction is devoted short entrance to the areas air - conditioning and survey used air - conditioner systems inclusive basic types and possibility using single air - conditioning system practically. Follows computational part, in which is effected heat loss calculation, summer heat gains air - conditioned object and psychrometr calculation summer and winter operationing air - conditioning system. After calculation needed parameters is effected design distribution air, machine - room air conditioning, dimensioning air channels and ventilators, design incoming and off-take anemostats and their regulations. Next part includes calculation power consumption during the operationing designed air - conditioning system.
|
|
|
Test bend for vehicle air-conditioning testing
Andrýs, Jan ; Hejčík, Jiří (referee) ; Štětina, Josef (advisor)
The aim of this work was to design test bend for vehicle air-conditioning. This test bend should simulate interior of the car and the engine compartment. Electric motor is used to drive compressor in test bend. Air supplied to test bend is modified to extreme conditions and the volume of supplied air is the same as the car drove at 50 km/h. Main frame of test bend is made from aluminium profiles manufactured by Bosch Rexroth, which provides great modularity. Walls are made from insulated panels by ELCOM System, they have very good insulation and are strong so additional equipment can be installed inside. Construction design was made is SolidWorks with 3D models of test bend as output. Air-conditong parts which were used as samples are originally from Skoda Octavia II. For this vehicle were made calculations of heat loads. In conclusion is simple testing example for this test bend and although there are some examples for future measuring.
|
|
|
Air conditioning of office in administrative building
Rieger, Lukáš ; Pavelek, Milan (referee) ; Janotková, Eva (advisor)
RIEGER, L.: Air conditioning of offices in administrative building The main contents of the thesis completed in the master's programme of the field M-TEP is to make a design of air-conditioning system of the offices on one floor of the office building, using dispositions according to the provided documentation. The theoretical part which deals with air-conditioning systems, devices and their constituent parts is followed by calculation chapters in which object properties are defined as heat loss, heat gain and the need for ventilation air. A proposal of air-conditioning system comprising psychrometric calculations, dimensioning of air distribution sizing, design of machine room and air-conditioner itself follows. The computational solution is supplemented by drawing documentation and specification of materials.
|
|
|
Optimization of indoor climate in the "open space" office
Vysloužil, Lukáš ; Blasinski, Petr (referee) ; Maurerová, Lenka (advisor)
The main aim of this thesis is design air-conditioning system and optimization of indoor climate by solar shading. In theoretical part I focused on dividing and description off different types of solar shading. In the next part I designed suitable air-conditioning system for the open space office. The last part is first concentrating on the simulation of the indoor climate in software BSim2014. And then on evaulation of the appropriate solar shading system, whick I can use in the building.
|
guest ::
